万博·体育全站(ManBetX-欧洲杯)官方登录入口

Optimize power generation output curve
Reduce wind and light abandonment and increase the share of renewable energy in power generation

Location： Home Product Center

Optimize the power generation output curve, reduce wind and light abandonment, and increase the proportion of renewable energy in power generation

PotisBank-L liquid cooled energy storage system provides world-leading clean energy technology to improve power quality, energy efficiency and environmental performance; Military application fin liquid cooled runner design, superior temperature performance, single battery pack temperature difference ≤3℃, single system temperature difference ≤5℃; BESS matches a variety of electrical systems to improve operational performance and reliability, not only enabling smoother integration of renewable energy sources, but also helping to balance power supply and demand.

Manual Download

Super performance

Precise control

Three-level architecture BMS, fine management, strict control of circulation, improve battery life.

Elastic expansion

With standardized module design, strong scalability, can meet the power and energy requirements of different scenarios; All components are pre-installed in the factory, saving the time of site installation and commissioning.

Multi-dimensional fire fighting

Equipped with electric core class, PACK class, cabin class three fire protection design; Equipped with temperature sensing, combustible gas detection and other detection sensors; Compatible with water fire, cabin gas fire and PACK gas fire.

Product parameters

entry	parameter	entry	parameter
Energy density	227.88kWh/m²	Thermal management	Liquid cooling + air cooling
Cell type	LFP	Size (length * width * height)	605827003100mm
Battery pack configuration	1P52S	weight	3tons
Battery cluster configuration	1P416S（8 racks）	Protection class	IP55
Number of battery clusters	10	color	RAL9010
Nominal voltage	1331.2V	Seismic load strength	Zone 4
Voltage range	1123.2V~1518.4V（Cell voltage:2.7V~3.65V）	Noise level	≤75 dB @1m(3.28ft)
Charge and discharge ratio	0.5P/1P*	Fire protection system	fm200
Rated capacity	3727.36kWh	Field emergency braking	is
Short-circuit current	45KA	Remote emergency braking	is
Communication mode	Ethernet/RS485/CAN	Pyrotechnic detection	Cluster + container
Communication protocol	Modbus TCP / Modbus RTU / CAN 2.0	Thermal diffusion technique	is
Auxiliary power supply	AC480V/60Hz,3P5W	FCL delivery (built-in battery)	is
Design standard	GB/T 36276-2018, UL1973, UL9540, UL9540A, UN38.3, IEC62619，NFPA69, NFPA70, NFPA855,NFPA68	Battery protection class	IP65
Standby power supply	Online(30min，adjustable）	Full power operating range	SOC5%~100%@25oC
Operating ambient temperature	-20℃ to 55℃(-4°to 131°F)	Maximum number of cycles	4 Times per day
Working altitude	＜2000m ( 2000m~4000m, Downpower operation)

Consultation and advice

Submit